Skip to content
This is an International BD154 four cylinder diesel engine out of a 3444 tractor. The engine came in with a broken main cap so we had to line bore and align hone the housing bore to get it all trued up and straight with the new main cap. After we got all the machine work [...]
Here's some pics of one of our radiator benchman doing some solder welding on a Caterpillar modular radiator core section. This is what we refer to as running a header which involves melting all the old solder and corrosion off of the tube-to-header joints and bringing it down to a raw and shiny silver state. [...]
This is a Caterpillar 16M grader axle that we did a complete rebuild and repair to. We completely disassembled the axle assembly and blasted it down to raw metal so we could check all the parts for cracks. We then welded all the worn out bores to make them smaller with our portable bore welder. [...]
This is a Caterpillar 834B Rubber Tire Wheel Dozer Radiator. We picked up the radiator on a Wednesday with leaks in the top header. It was a rush job so we worked on it Thursday and Friday in the shop and then delivered it back to one of our mine customers on Saturday. Motor Mission [...]
Here's some pics of a pair of heavy duty aluminum hydraulic oil coolers. They're for a Bucyrus Caterpillar 6060FS hydraulic shovel. They're actually laying down sideways on our stand because they would be too tall on our trailer if we mounted them vertically like they mount on the shovel. Motor Mission Machine & Radiator 5435 [...]
This is a 1969 Ford Mustang Mach1 429 V8 water pump. Our customer purchased a new water pump but it is longer than the original pump and would not line up correctly. He couldn't find another pump exactly like his original one so he brought it in so we could rebuild it for him. We [...]
Here's some pics of a custom drain plug we machined for an ATV quad fourwheeler. Someone tried repairing the drain plug threads in the engine by installing a Time-Sert thread repair insert into the engine but it did not seal and continued to leak. So we removed the Time-Sert and made a new drain plug [...]
Here's some pics of a 4.3 Chevy V6 engine we did all the machine work to. We also supplied all the new parts such as the pistons, rings, rod bearings, main bearings, camshaft bearings, oil pump, timing set, and Fel-Pro gasket set for the complete engine rebuild. It has a hydraulic roller cam & lifter [...]
This is a Caterpillar 928G loader radiator project. The original radiator is an aluminum core with plastic tanks. The plastic tanks, or end caps as they are often called, are cracked and leaking. To completely eliminate the plastic radiator tanks we built an all metal replacement. The radiator is made with a high efficiency copper [...]
Here's some pics of some heat exchanger units we rebuilt and recored. The yellow one is a Mesabi style compressor cooler and aftercooler for a Caterpillar MD6240 drill rig. Both of these untis feature aluminum Mesabi tubes. The gray and black unit is a radiator, oil cooler, aftercooler, and AC condenser for a Manitowoc crane. [...]
