Skip to content
This is an aluminum cylinder head off of a Case 1830 Uniloader skidsteer tractor that came in for rebuilding and repair. It is a four cylinder gasoline powered engine. The engine is marked or marketed and sold as a Continental but it is actually made by Renault. It is a 1.1 liter [...]
The pictures in this post show some of our rebuilding capabilities and general work that we perform. In the pictures is a Hitachi EX5500 shovel radiator that we rebuilt and painted orange. The two larger yellow radiators are Komatsu 830E haul truck Mesabi L&M style radiators that we rebuilt & completely overhauled. In [...]
This is a cylinder head off of a 2007 Isuzu NPR HD flatbed truck. The engine is a model 4HK1-TC which is a four cylinder turbo charged diesel engine. This cylinder head was leaking past its injector sleeves causing the truck to push coolant out of its coolant reservoir. We performed a complete [...]
This is a Caterpillar 793C haul truck radiator that we rebuilt and performed a complete overhaul to. Once we got the radiator completely rebuilt we loaded it onto our trailer and delivered it to one of our mining customers up in northern Nevada. The 793C radiator has sixty individual Caterpillar folded radiator cores. [...]
This is a 2-stroke motorcycle ATV cylinder jug that came in for a bore and hone. It is an aluminum air cooled engine so that is what all the fins around the outside of the cylinder jug is for, to keep it cool. We put the cylinder in our Rottler boring bar so [...]
This is a 318 Dodge Chrysler Plymouth V8 engine that we performed some machine work to here at our fully equipped Las Vegas machine shop. We did a bore and hone to the cylinders for the new oversize pistons and rings. We then blasted and resized / reconditioned the big ends of the [...]
This is the radiator core of a forklift radiator that came in overheating. These pictures are of the top header after we got the top tank removed. As you can see, all the tubes, or cores as some people refer to them as, are plugged solid. There is also some big clumps of [...]
This is a 360 cubic inch Ford FE (Ford Edsel) V8 engine that we are doing a rebuild to. In this post we have the pistons and connecting rods installed in the right bank while the left bank is waiting for the slugs to go in. We performed all the machine work to [...]
Here's a couple of aluminum radiators for a 2006 Lamborghini that came in to be repaired. Our customer previously had them at another radiator shop but he wasn't satisfied with their work as the radiators both still leaked. Due to the bad work performed by the other shop we couldn't do much to [...]
This is a Ford Lincoln 430 cubic inch V8 engine from the '60's that came in for a rebuild. We completely cleaned, magnafluxed, measured, and inspected the block, crank, connecting rods, & cylinder heads. We then performed all the necessary machine work including the balancing of the rotating assembly before we assembled the [...]
