Skip to content
This is a LeTourneau L1850 loader radiator we rebuilt for one of our large open pit mine customers. This radiator is a Mesabi style radiator that has nearly 1,600 individual L&M Mesabi style radiator & oil cooler tubes. This radiator and oil cooler assembly is comprised of a high temp radiator, a low [...]
This is a Caterpillar 938G loader that we're repairing the pin bores on. The bores are worn out and distorted so we setup our portable line bore boring bar to it so we could machine and bore the bores for proper fit to the new pins. Though we have a portable line bore [...]
This is a late model Chevy 350 that has a one piece rear main seal. The block is also set up for a roller cam and lifters so it is referred to as a roller block. The first thing we did was thermal clean the block in our Bayco oven in order to [...]
This is a Caterpillar 938G loader bucket that we are boring the pin holes of with our portable line bore boring bar machine. The holes that the pins go in are worn and pounded out so we either weld the bores and then machine and bore them with our portable line bore or [...]
This is a recent run we made to one of our mining customers up in northern Nevada. We picked up these two hydraulic oil coolers which are off of a Hitachi EX5500 shovel. The hydraulic system was overheating so they removed these hydraulic oil coolers and installed a set of our recored hydraulic [...]
This is a Hercules White four cylinder diesel engine that came in for a complete engine rebuild. We completely disassembled the engine, thermal cleaned, blasted, magnafluxed, pressure tested, measured, inspected, bored, honed, surfaced, align honed, crank ground & polished, connecting rods reconditioned, cylinder head valve job & surface, & assembled the engine complete [...]
This is a Caterpillar 3406B cylinder head that came in for a clean, magnaflux for cracks, pressure test for leaks and cracks, inspection, valve job, and surface. If you need any machine work, cylinder head rebuilding, engine machining, engine rebuilding, flywheel surfacing, broken bolt removal, aluminum welding, fabricating, rod and repair on your [...]
This is the custom and special built high efficiency copper and brass radiator and fan shroud with two high performance electric fans we built for the International truck called Ditch Digger for Steve Darnell of Welderup Welder Up and his TV Show Vegas Rat Rods that airs on the Discovery Channel. We built [...]
This is a custom high efficiency copper and brass 4-row radiator with an aluminum fan shroud to house a high performance electric fan that we built for Steve Darnell of WelderUp / Welder Up and his TV show Vegas Rat Rods that airs on the Discovery Channel. This particular rat rod is powered [...]
This is a custom and special built high efficiency 4-row radiator and fan shroud for a high performance electric fan we built for the 1930 Ford Model A Stampede Rod we built for Steve Darnell of Welderup / Welder Up that he built on his show Vegas Rat Rods on the Discovery Channel. [...]
