Skip to content
This is one of our custom and special built copper and brass bolt-on style radiators with a fan shroud with copper inlays for a high performance electric fan. We built this radiator and fan shroud for Steve Darnell of WelderUp / Welder Up for the 4BT Cummins diesel powered rat rod that he [...]
This is a couple of Cummins ISL-G 8.9 liter inline 6-cylinder cylinder heads we rebuilt and overhauled with a complete valve job & surface. These heads are similar to the 8.3 liter C-Series 12-Valve Cummins diesel cylinder heads but they are actually ran on CNG (Compressed Natural Gas). The ISL-G Cummins is also [...]
This is a set of GM Chevy LS aluminum cylinder heads that we just finished machining. Our customer requested we surface .015 off the surfaces of them in order to raise the compression. We first performed a vacuum test, pressure test and inspection to the cylinder heads. Once we made sure both cylinder [...]
This is a recent pick up we did at one of our mine customers in Northern Nevada. We picked up two Hitachi EX500 shovel radiators. The Hitachi EX500 radiators are what we call dual radiator assemblies because they are comprised of a low temp radiator and a high temp radiator. The Hitachi EX5500 [...]
This is a Jeep AMC radiator that we built because our customer was having severe overheating problems with the aluminum radiator that was being used. So we custom built a copper and brass radiator with a custom fabricated aluminum fan shroud that mounts up two high performance Spal electric fans. The aluminum radiator [...]
This is a 1-1/2 horsepower IHC International McCormick Deering Model M Throttle Governed Hit N Miss Style Flywheel engine. Some people just call it a horse and a half. We disassembled the engine so we could remove the cylinder sleeve. The cylinder was so badly worn that the piston-to-wall clearance was so excessive [...]
This is a Caterpillar 966 loader bucket that came in to have its pin bores repaired. The bores for the pins were all worn out so we used our portable line bore to machine them and true them up. Some of the bores we simply welded and then bored them out. Other bores [...]
This is a custom built all metal copper and brass radiator we built for a Ford Bronco. We also custom built an aluminum fan shroud for two high performance Spal electric fans. The radiator is a high efficiency 3-row core. This Ford Bronco was actually a sand drag race car back in the [...]
Here's a Komatsu WA900 loader radiator with two charge air coolers (CAC's) that we just finished overhauling and re-coring. The radiator and coolers came in to be rebuilt with a complete overhaul but the radiator core as well as the charge air cooler cores were all to degraded and plugged up to cost [...]
This is our Crofton Bug. It has a Crosley engine. These are unique looking vehicles that look somewhat similar to a Jeep. They are also referred to as a Farm-O-Road. Jimmy Ewing Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]
