Skip to content
This is an industrial 2-step two step flywheel that came in to be surfaced. The flywheel was pretty well worn so the clutch was slipping and not transferring enough power from the engine to the transmission. You can see the grooves and low spots in the picture before we surfaced the flywheel. In [...]
This is a couple of Cummins 8.9 liter ISL cylinder heads that came in for rebuilding. We performed a complete valve job and surface on these cylinder heads which are for some transit buses that run and operate on CNG compressed natural gas. These Cummins heads are of the 12 valve variety. They [...]
This is a recent pick up of parts from one of our mine customers. The large yellow radiator on the front of our trailer is a Caterpillar 793C folded core style haul truck radiator that is leaking and needs to be repaired, rebuilt, & overhauled. On the trailer behind the 793C radiator is [...]
This is a set of Dart Pro1 aluminum V8 cylinder heads that came in for a valve job and surface to be freshened up. These cylinder heads are off of a 434 cubic inch small block Chevy V8 engine in a sandrail dune buggy that runs on alcohol. We disassembled the heads to [...]
Here's some gas tanks we have cleaned, repaired, pressure tested, prepped, and painted for a complete fuel tank restoration job. Most of the gas tanks we get in are due to either leaks or rotten and varnished gas build up. We thoroughly clean the fuel tanks and then thermal clean them in our [...]
These are a couple of custom copper and brass high efficiency radiators we built along with custom fabricated aluminum fan shrouds with dual high performance Spal electric fans. Both radiators were completely manufactured, fabricated, and built in-house here at our complete machine and radiator shop here in Las Vegas, Nv. We can custom [...]
These are the trophies we built for Chris Tocco at RC Tracks of Las Vegas for the 2016 IFMAR 1/8 8th scale nitro off road world championship race held from September 30th, 2016 to October 8th, 2016. All of us RC enthusiasts have been anticipating the Worlds race. Awhile back Kyle Johnson who [...]
This is the Hitachi EX5600 shovel that is on display here at the 2016 MinExpo here in Las Vegas, Nv. The pictures of the radiators and hydraulic oil coolers are for the Hitachi EX5500 hydraulic shovels. We rebuild and recore radiators for the Hitachi EX5500 shovels on a regular basis. We also service [...]
Here are some of our radiators, coolers, and a fuel tank that we just finished overhauling, cleaning, and rebuilding that we have on display in front of our shop for attendees of the 2016 MinExpo to come and look at while here in Las Vegas, Nv. The first radiator on the left is [...]
These are some pictures of some larger mining equipment radiators that we have rebuilt and overhauled for some of our mining customers in northern Nevada. The orange radiator is a mechanically bonded core continued flat fin radiator that we re-cored for an Atlas Copco Pit Viper 351 drill rig. The two yellow radiators [...]
