Skip to content
This is a set of GM Chevy LS aluminum cylinder heads that we just finished machining. Our customer requested we surface .015 off the surfaces of them in order to raise the compression. We first performed a vacuum test, pressure test and inspection to the cylinder heads. Once we made sure both cylinder [...]
This is a recent pick up we did at one of our mine customers in Northern Nevada. We picked up two Hitachi EX500 shovel radiators. The Hitachi EX500 radiators are what we call dual radiator assemblies because they are comprised of a low temp radiator and a high temp radiator. The Hitachi EX5500 [...]
This is a Jeep AMC radiator that we built because our customer was having severe overheating problems with the aluminum radiator that was being used. So we custom built a copper and brass radiator with a custom fabricated aluminum fan shroud that mounts up two high performance Spal electric fans. The aluminum radiator [...]
This is a 1-1/2 horsepower IHC International McCormick Deering Model M Throttle Governed Hit N Miss Style Flywheel engine. Some people just call it a horse and a half. We disassembled the engine so we could remove the cylinder sleeve. The cylinder was so badly worn that the piston-to-wall clearance was so excessive [...]
This is a Caterpillar 966 loader bucket that came in to have its pin bores repaired. The bores for the pins were all worn out so we used our portable line bore to machine them and true them up. Some of the bores we simply welded and then bored them out. Other bores [...]
This is a custom built all metal copper and brass radiator we built for a Ford Bronco. We also custom built an aluminum fan shroud for two high performance Spal electric fans. The radiator is a high efficiency 3-row core. This Ford Bronco was actually a sand drag race car back in the [...]
Here's a Komatsu WA900 loader radiator with two charge air coolers (CAC's) that we just finished overhauling and re-coring. The radiator and coolers came in to be rebuilt with a complete overhaul but the radiator core as well as the charge air cooler cores were all to degraded and plugged up to cost [...]
This is our Crofton Bug. It has a Crosley engine. These are unique looking vehicles that look somewhat similar to a Jeep. They are also referred to as a Farm-O-Road. Jimmy Ewing Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]
This is a Komatsu WA1200 loader Radiator and Oil Cooler assembly that we completely rebuilt and overhauled. This cooling module is a Mesabi style radiator and oil cooler that has nearly 1,600 total individual L&M tubes. It consists of a high temp radiator, low temp radiator, and an oil cooler section. We picked [...]
This is a custom built and manufactured all metal copper and brass high efficiency 3-row radiator that we built for a customer that is building a 1984 Chevy C10 pickup truck with a GM LS3 V8 engine going in it. In addition to the radiator we also custom built and fabricated the aluminum [...]
