Skip to content
This is an old Hercules engine water pump that we rebuilt. We completely disassembled the water pump and had to machine and counter-bore the housing for a new style seal. We also had to machine a new shaft as well as some other internal parts and pieces of the water pump. This Hercules [...]
Very professional, fast, courteous and fairly priced. My items were finished when the work was promised. Everything went down the way it was supposed to. Thank you motor mission/Jimmy.
This is a 345 cubic inch cast iron V8 International Navistar gasoline engine we machined. These pictures show the engine block in our Rottler boring bar getting the cylinders bored for oversize pistons and rings. If you need any engine machining or machine work done we can handle it right here in our [...]
This is an all metal copper and brass radiator for a Ford Model T that we recored. The customer brought this Model T Radiator in because it was running hot. He recently purchased the radiator from The Brassworks but he said it kept boiling over. So we first disassembled the radiator to see [...]
This is a Continental F163 flathead 4-cylinder gasoline engine we rebuilt for a Clark forklift. We completely disassembled the engine and put the block, crank, rods, & cylinder head in our Bayco oven to be completely thermal cleaned. After the thermal cleaning we put the parts in our Zero shotblaster before performing a [...]
This is an all metal copper and brass old antique classic radiator out of a 1939 Cadillac limo that has a flathead V8 engine. We completely disassembled the radiator in order to perform a complete radiator restoration and rebuild. Once the radiator components were all disassembled the radiator tanks, hose connections, and radiator [...]
This is a set of hydraulic oil coolers that we re-cored for a Hitachi EX5500 shovel for one of our mining customers. The original flat tube steel cores were leaking in several areas of the core due to cracks in the tubes. So we cut the tanks of off the original cores and [...]
This is a Komatsu radiator we completely rebuilt and overhauled for an 830E AC Komatsu haul truck. This radiator is a Mesabi L&M style radiator that has nearly 1,500 tubes in it. Each Mesabi L&M tube is removed and then boiled, ultrasonic cleaned, & polished on both ends where they seal at the [...]
This is a Hitachi radiator that we completely overhauled and reconditioned for an EX5500 shovel for one of our mining customers. The Hitachi EX5500 has two engines and therefore has two radiator and four hydraulic oil coolers. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) [...]
This is a LeTourneau Mesabi L&M style radiator for an L1850 loader that we rebuilt. Each of the individual Mesabi L&M tubes were removed for ultrasonic cleaning, boiling, & polishing. All of the rubber grommet seals were replaced in the tanks before the rebuilt tubes were re-installed back into the radiator. This LeTourneau [...]
