Skip to content
Here's some pics of some Mesabi Radiators we're rebuilding for some Caterpillar 793D & 793F haul trucks. Each individual Mesabi radiator tube is removed for cleaning & reconditioning. All the upper & lower rubber grommet seals are removed from the bores of the tanks which get cleaned & qualified before all new rubber grommet seals [...]
Here’s some pics of a Caterpillar 16G Grader Circle and Drawbar A-Frame assembly we repaired & did a complete rebuild to. All the component parts were blasted down to raw metal so we could dye check for cracks. Once all the cracks were identified we prepped & welded them up. All the worn bores were [...]
Here’s some before & after pics of a Caterpillar D6N track type dozer cooling package that came in for a cleaning & repair. The radiator had already been repaired in the past. We separated the radiator from the oil cooler so we could clean & flush each one individually. We then pressure tested them to [...]
Here are some pics of a Caterpillar 793F Mesabi Radiator Module Assembly. Along with the radiator, attached to it are the aftercoolers, AC condenser, fan with the hydraulic fan motor, the fan shroud & guard as well as numerous other peripheral pieces & parts. With us rebuilding & assembling all these parts it makes the [...]
Here’s some pics of a diesel fuel tank off of a Caterpillar D10T dozer that we reconditioned. The tank came in due to some leaks which we found to be coming from some cracks. After thoroughly cleaning the tank inside & out we blasted it down to raw metal. We then had to cut some [...]
Here's some pics of an Atlas Copco Pit Viper Drill Rig dual aftercoolers, or CAC, assembly we recored. The coolers came in with several leaks within the tubes of both cores. We cut the tanks off the old cores & machined them to size. We then tig welded the tanks to some new heavy duty [...]
Here’s some pics of a Cummins diesel engine block that came in to be fitted with a new set of cam bearings. We didn't do any machine work on this one. Our customer only requested it to be degreased with the steam cleaner to remove all the old engine oil. We knocked the old cam [...]
Here’s a pic of a couple of Mesabi Radiators we're finishing up the rebuilds to. The closest radiator in the pic is for a Caterpillar 793F haul truck. The taller radiator is for a LeTourneau L1850 loader. Both radiators received complete overhauls with each individual tube being removed, cleaned, reconditioned & re-installed with all new [...]
Here’s some pics of a Caterpillar 793D mining haul truck Mesabi radiator. Two of the pics show the radiator tanks & side frames assembly with all the individual Mesabi radiator tubes removed for reconditioning. Two of the pics show the Mesabi tubes all stacked up after being removed from the tanks & side frames assembly [...]
Here’s some pics of some heavy equipment parts we picked up for repairing & rebuilding. The three large pieces are all for a Caterpillar 793C haul truck. There's the radiator, a rear axle a-frame support & a fuel tank. On the very back of the trialer is an aluminum oil cooler for an air compressor [...]
