Skip to content
Here’s some pics of a Caterpillar 793F haul truck radiator module assembly we completed. The radiator itself is a Mesabi which we performed a complete rebuild to. After the radiator rebuild was done we installed the Caterpillar aluminum aftercoolers, AC condenser, fan, hydraulic fan drive, fan shroud, fan guard, grill pieces, steps & stairs, ladder, [...]
Here’s some pics of Caterpillar 16M Grader Axle assembly we delivered back to our customer after we did a complete repair & rebuild to it. Every piece & part was disassembled, cleaned, blasted & dye checked for cracks. After each part was qualified after detecting for cracks each piece was machined, welded & re-machined back [...]
Here’s some pics of a Caterpillar 793C haul truck radiator we picked up for repairing & rebuilding. We'll post some more pics of it as it gets going through our disassembly, cleaning, repairing & rebuilding process. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission [...]
Here are some pics of a couple of shell-and-tube heat exchangers we completed. Both coolers had numerous tubes that were plugged solid internally. We ended up replacing the bundles on both of these coolers as the originals were heavily corroded internally & would not provide a long service life. 5435 Desert Point Dr. Las Vegas, [...]
Here’s some pics of a Caterpillar 793C haul truck A-Frame rear end diff support that we overhauled. The bolt holes around the hitch pin bore were cracked so that means the entire yoke needed to be replaced. After cutting the cracked yoke out from the legs, or supports, we prepped them for placement of the [...]
Here’s a few pics of a Caterpillar 793C Radiator we picked up for rebuilding. We'll post more pics of it during the rebuild & when it's all done. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here are some before & after pics of a Tee Bar assembly we repaired. The round pad was extremely worn on the top & bottom due to a lack of grease which caused metal-to-metal contact between the t-bar surfaces & the piece that swivels on it. We machined both sides down until they were flat [...]
Here’s some before, during & after pics of a Mesabi Radiator we did a complete repair & overhaul to. The radiator is out of an Astec Trencor 1660HD Trencher. The radiator was in pretty rough shape & in dire need of some major TLC. After removing all the individual tubes & rubber grommet seals for [...]
Here’s some pics of a Caterpillar 793C haul truck radiator we overhauled. The delivery back to our customer was a slow go on the roads with the weather but we got it there. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here’s some pics of a custom water pump pulley we machined out of a solid round piece of aluminum. The larger pulley was shipped to us to use as a pattern for machining the smaller diameter pulley. We made the new water pump pulley as small as possible in order to clear the housing of [...]
