Skip to content
Here’s some pics of a Caterpillar 785 water truck folded core radiator we picked up, cleaned, repaired, pressure tested, painted & delivered back to our customer. We picked the radiator up from our customer at 11am one day & got it delivered back to them by 8:30pm the next day. 5435 Desert Point Dr. Las [...]
Here’s a couple of Caterpillar haul truck radiators we're overhauling. The larger radiator is a 793D Mesabi & the smaller one is a 793C folded core radiator. Up next for both radiators is pressure testing & then final detailing & delivery back to our customers. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) [...]
Here’s some pics of a set of Caterpillar 16M Grader Axle lean arms 2641150 & 2641153 on our Rottler CNC machine. These lean arms came in on an axle assembly that was worn to the extreme. Both lean arms were completely worn on all surfaces & bores. To get the lean arms back to spec [...]
Here’s some before & after pics of a John Deere 4220 tractor radiator & oil cooler assembly. We removed the top & bottom tanks on the radiator & gave it a complete rod & repair. The oil cooler was cleaned, flushed & pressure tested. Both the radiator & oil cooler are now clean inside & [...]
Here’s some before & after pics of an older cast iron water pump off of a Hercules model JXLD engine that was shipped to us for repairing & rebuilding. We completely disassembled the pump & performed all necessary machining to the cast iron housing, the shaft & seal areas. We also custom machine any of [...]
Here’s some pics of a Caterpillar 793D haul truck radiator we overhauled. This radiator is a Mesabi type. Each individual Mesabi tube was removed & reconditioned. All the rubber grommet seals were removed & all the holes were cleaned & inspected before new rubber grommet seals were installed. After all the individual Mesabi tubes were [...]
Here’s some pics of a Caterpillar 793D haul truck Mesabi Radiator module we're in the process of rebuilding. The tanks & side frames assembly have been cleaned, prepped & painted. The bores were then wire brushed clean, checked for any wear & size before the new rubber grommet seals were installed. The next step is [...]
Here’s some pics of a Caterpillar Grader Axle on our Rottler Multipurpose CNC boring & milling machine. The surfaces on each side of the center support bore were badly worn so we welded them up & then machined them flat, square & back to the correct thickness spec. The surfaces that retain the lean arms [...]
Here's some pics of a Caterpillar 793C mining haul truck radiator we picked up for repairing and rebuilding. We'll post more pics of this one after we get it all done. 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here are some before & after pics of an industrial 2-step flywheel we surfaced. The flywheel is off of a Kenworth semi truck with a manual transmission. We first machine the larger lower surface on our Winona Flywheel Grinding machine & measure how much material is removed. We then setup on the narrower upper surface [...]
