Skip to content
Here’s a couple pics of a Caterpillar 793F haul truck radiator we overhauled. This one is a Mesabi radiator with just under a thousand individual radiator tubes. Along with the radiator are the aftercoolers & grill pieces. The next one of these will be fully dressed out to make a complete cooling module assembly. Motor [...]
This is a Yamaha cylinder head off of an Arctic Wildcat XX that came in needing some machining due to being overheated. The surface, or deck, of the head was warped & twisted. We surfaced the deck flat & smooth for a good seal to the new head gasket. The engine in the Wildcat XX's [...]
Here are some pics of a custom high performance all metal copper & brass cored radiator & electric fan shroud we built for a rat rod. The bolt-on radiator tanks are all hand made & we ground some notches in them to go along with the design on the rest of the car. The fan [...]
Here’s a couple pics of a couple of Caterpillar yokes. The yokes mount to the hardnose (grill guard) on the front of a dozer. The lift cylinders for the blade connect to the yokes so they take a pretty good beating. In these pics we are dye checking them for cracks before moving them into [...]
Here’s some pics of an oil cooler we picked up from one of our customers for repair & return. This Heat Exchanger is used for cooling the oil system in the mill operations of a mine. The first thing we'll do is get the cooler flushed & cleaned internally of all the oil. Then the [...]
Here's a couple pics of a driveshaft we made for an ice plant. The original shaft was broken so we were given a drawing with dimensions & specs to machine to. This driveshaft is what we ended up with after machining a solid steel bar stock to the specifications of the drawing. Motor Mission Machine [...]
Here’s some pics of a Caterpillar 793C Radiator we picked up for repairing and rebuilding. All sixty radiator cores, or sections, are removed & ready to go through our rebuild process. The tanks & frames are ready to get cleaned, inspected & repaired along with our stand which will get stripped of the black paint [...]
Here’s some pics of a cylinder head & cylinder block for a Polaris RZR XP1000 UTV side-by-side. We performed a three angle valve job & surface on the cylinder head to bring it back up to snuff. The cylinders were good enough to get by with a quick brush up with our diamond stones in [...]
Here's some pics of a Komatsu 830E haul truck radiator going through our rebuilding process. This is a Mesabi radiator that has just under fourteen hundred individual copper tubes. After being removed from the tanks & frame assembly each tube is pressure washed inside & out before getting soaked in our ultrasonic cleaning tanks. The [...]
Here's some pics of a Cat Radiator & a Mill Compressor oil cooler we picked up for repair & return. The radiator is for a 793C haul truck. The oil cooler that's laying on the back of the trailer is used for cooling the oil for some large roller bearings in the mill. Motor Mission [...]
