Skip to content
Here's a couple pics of a driveshaft we made for an ice plant. The original shaft was broken so we were given a drawing with dimensions & specs to machine to. This driveshaft is what we ended up with after machining a solid steel bar stock to the specifications of the drawing. Motor Mission Machine [...]
Here’s some pics of a Caterpillar 793C Radiator we picked up for repairing and rebuilding. All sixty radiator cores, or sections, are removed & ready to go through our rebuild process. The tanks & frames are ready to get cleaned, inspected & repaired along with our stand which will get stripped of the black paint [...]
Here’s some pics of a cylinder head & cylinder block for a Polaris RZR XP1000 UTV side-by-side. We performed a three angle valve job & surface on the cylinder head to bring it back up to snuff. The cylinders were good enough to get by with a quick brush up with our diamond stones in [...]
Here's some pics of a Komatsu 830E haul truck radiator going through our rebuilding process. This is a Mesabi radiator that has just under fourteen hundred individual copper tubes. After being removed from the tanks & frame assembly each tube is pressure washed inside & out before getting soaked in our ultrasonic cleaning tanks. The [...]
Here's some pics of a Cat Radiator & a Mill Compressor oil cooler we picked up for repair & return. The radiator is for a 793C haul truck. The oil cooler that's laying on the back of the trailer is used for cooling the oil for some large roller bearings in the mill. Motor Mission [...]
Here’s some pics of a Caterpillar Ingersoll Rand Air Starter Motor we rebuilt. We completely disassembled it for cleaning & inspection. We replaced all the worn & damaged internal pieces & parts. Everything was brought back to OE specs before final assembly. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 [...]
Here’s some pics of a Caterpillar 785B haul truck radiator we rebuilt & delivered back to our customer. This radiator features our genuine Motor Mission rebuilt folded radiator cores topped off with a hand crafted paint job on the complete assembly for that added touch of perfection!! Motor Mission Machine & Radiator 5435 Desert Point [...]
Here’s some pics of the spindles & housings being assembled for a Caterpillar 16M grader axle that's in for repairing & rebuilding. All the bores & surfaces have been machined, welded & finish machined to the OE specs. All new bushings, seals & pins have been installed for the premium rebuild. Motor Mission Machine & [...]
Here's some pics of a Caterpillar D10 Dozer hardnose grill shell all gutted out for a complete cooling system components repair & rebuild. The nosecone, or grill shell, is ready to get all its bushings removed, checked for cracks & any necessary welding & machine work. Once it is all reconditioned we will install all [...]
Here’s some pics of an infield repair we did to a Mesabi radiator in a Komatsu 830E haul truck. The fan picked up some debris & chucked it into the radiator which caused some major leaks. We ended up removing thirty tubes along with their respective upper & lower rubber grommet seals. After some wiping [...]
