Skip to content
Here's a couple of trailer hubs that came in with the bores worn & damaged where the races are supposed to press in place. We machined the bores true, round & on center. We then machined some sleeves which we pressed into the reconditioned bores. After the sleeves were pressed in place we machined the [...]
This is a Caterpillar D10T dozer hardnose radiator guard cooling package we rebuilt & loaded up for delivery. All the Cat AMOCS (Advanced Modular Cooling System) radiator cores, or sections, were cleaned, repaired & pressure tested before getting re-installed into the lower radiator tank inside the grill guard. Both aftercoolers were addressed along with the [...]
Here’s a couple of Caterpillar mining haul truck radiators we rebuilt & have loaded up for delivery. The smaller radiator is a 789B & the bigger one is a 793C. Both radiators are Cat's folded core style. We did a repair & complete overhaul to both radiators to get them ready for their fresh engines [...]
This is a Caterpillar 16M grader circle, drawbar & moldboard assembly with the circle drive motor that we did a complete repair & rebuild to. After welding & repairing all the cracks we machined all the bores & surfaces back to Cat specs. The three pieces were then assembled with all new pins, bushings, shims [...]
Here’s a couple of jobs we picked up from one of our mining customers. The radiator is a Mesabi for a LeTourneau L1850 loader. The assembly is actually a radiator & oil cooler. On the back of the trailer is a Caterpillar 793C A-Frame rear axle support that needs the yoke replaced where the hitch [...]
This is a Caterpillar 18M Grader front axle we did a complete repair & overhaul to. All the bores were machined oversize to clean & true them up, then they were welded & then line bored to the Cat specs. All new bushings & seals were installed along with new pins & hardware for the [...]
Here’s some progress pics of a Caterpillar D10T hardnose, or nosecone, cooling package rebuild. Inside the hardnose, or grill guard as Cat calls it, are the AMOCS modular radiator cores (sections), hydraulic & engine oil coolers, AC condenser & aftercoolers. The hardnose itself got stripped down to nothing before new inner & outer bushings were [...]
Here's a load of Radiators & a Grader Circle we repaired & overhauled that we delivered to one of our mining customers. On the front of the trailer is a Caterpillar 793F Mesabi Radiator dressed out with copper Aftercoolers. The gray radiator is a high temp & low temp assembly for a P&H 2650cx hybrid [...]
This is a Caterpillar 793F haul truck radiator in our test tank getting pressure tested. The 793F radiator is a Mesabi which has just under a thousand individual radiator tubes. Each tube was removed for cleaning & polishing before getting installed back into the tanks & frame assembly with all new rubber grommet seals. After [...]
This is an aluminum radiator, aftercooler & oil cooler cooling stack package for a 2014 KPI Model FT2650 Tracked Jaw Crusher. The tubes of the radiator core were cracked & leaking so we recored the radiator with a new heavy duty bar-and-plate cbar core. The aftercooler & oil cooler were cleaned & repaired before final [...]
