Skip to content
This is a transmission out of a Gehl telehandler. The transmission came in for repair because the machine would not move when it was put into gear. Some of the parts have been a challenge to get. We went ahead & made some of the parts while some of them are still due in. Once [...]
This is a Caterpillar 793C haul truck radiator in our test tank getting pressure tested today. After a couple hours under pressure we'll get it dried off & dressed out with the shroud pieces & it'll be ready for delivery to one of our mine customers. Motor Mission Machine & Radiator 5435 Desert Point Dr. [...]
This is a copper cuprobrazed aftercooler off of a Caterpillar 793F haul truck. This is one of the two coolers that came in for cleaning & pressure testing. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission
Here’s some pics of a Caterpillar 793F Mesabi Radiator getting pressure tested in our test tank. All the individual tubes have been removed & they have been cleaned & their ends buffed & polished before being reinstalled back into the radiator tanks & sideframes assembly. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las [...]
Here's some pics of a split bore flanged sleeve we machine out of some solid round hardened steel material. The sleeve is to repair a split bore in a center Y-Link, or dogbone. The Y-Link is welded, machined, bored & counterbored & then the new sleeve is pressed & locked in place. This is all [...]
Here's some Caterpillar folded radiator cores going through our rebuilding process. These cores are for a 793C haul truck radiator. All sixty cores have been cleaned in the ultrasonic & all the tubes have been rodded out. After each core gets the rod & repair each one will get pressure tested. Motor Mission Machine & [...]
Here’s some pics of a high performance Chrysler, or Dodge, 440 engine block we're machining. The cylinders have been bored for a set of thirty (.030) over ICON forged pistons. In these pics the cylinders are being honed with a torque plate torqued to the deck which simulates the cylinder head being torqued in place [...]
Here's a couple pics of a Mesabi radiator going through our cleaning & rebuilding process. This one is for a Caterpillar 793F haul truck. We'll post more pics & info as it nears completion. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) [...]
Here's a Caterpillar D10 Dozer radiator in the test tank going through our rigorous pressure test procedures. This radiator is a Caterpillar AMOCS modular radiator with individual radiator cores. Each individual core has been reconditioned & pressure tested before being assembled as a complete radiator & pressure tested as a complete assembly. Motor Mission Machine [...]
This is a turbo & exhaust manifold off of a Polaris RZR. The cast iron manifold was warped where it mates up to the cylinder head. We mounted the manifold on our milling machine & machined the surface until it was flat & square. It will seal up to the cylinder head nice & leak [...]
