Skip to content
This is a custom copper & brass radiator we built for a '50's-'60's Jeep Willy's. The rig has been swapped with a different engine that was uniquely positioned which required an unconventional arrangement for the radiator & hose connections. We also fabbed up the custom aluminum fan shroud which mounts & properly flows the air [...]
Here's a left & right side spindle & spindle housing assembly for a Caterpillar 16G grader. We welded & machined both spindle housings back to Cat specs. We then assembled the spindles into the spindle housings with all new races, seals, bearings & bolts. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, [...]
Here’s some pics of a Caterpillar D10 Dozer AMOCS Hardnose, or Nosecone, Radiator assembly we're rebuilding. The hardnose itself was bent & tweaked on the bottom which required some cutting, welding, straightening & new steel plate welded back in place. The AMOCS radiator cores, or sections have all been cleaned, flushed, repaired & pressure tested [...]
This is a 7.8 liter Ford diesel engine out of a 1989 Ford F800 boom truck. The engine had been overheated & needed some cylinder head work performed. After we got the engine all together we test ran it multiple times to heat cycle it & make sure it all checked out good. After setting [...]
Here’s some before & after pics of a Caterpillar 793C folded core haul truck radiator. The radiator suffered some major damage from the fan coming apart & hitting it. Twenty Five of the sixty folded radiator cores were damaged beyond repair. We got it all repaired & ready for another round of service. We then [...]
Whatever our customers need we do our best to make it happen. Here's a Rubbermaid 100 gallon tote & a couple of large red buoy's one of our customers asked if we could get to them. If we can do it, we'll get it done!! Motor Mission Machine & Radiator 5435 Desert Point Dr. Las [...]
This is a Mesabi radiator off of a Caterpillar MD6240 rotary drill rig. We had to do a quick turnaround on this one. We picked the radiator up on Monday Memorial Day & delivered it back to our customer on Wednesday. Our crew worked around the clock on Tuesday to crank it out. We got [...]
Here's some random engine projects going on in the machine shop. Various machining operations are happening from cylinder boring & honing, deck milling & surfacing, rotating assembly balancing along with complete engine assembly. Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Ph: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 [...]
This is a Caterpillar D10T dozer radiator assembly we picked up for repair & overhauling. The radiator is comprised of Caterpillar AMOCS modular radiator cores, or sections, which are housed inside of the hardnose or nosecone assembly. The hardnose has some heavy damage on the bottom side so major straightening & extensive welding will be [...]
Here's a couple of Caterpillar tanks we cleaned, repaired & overhauled. The smaller one is a hydraulic tank off of a Caterpillar 793D haul truck. The larger one is a fuel tank for either a 793C or a 793D Cat haul truck. Both tanks came in with leaks from structural damage. We repaired & straightened [...]
