Skip to content
This is a Caterpillar 793C haul truck fuel tank that we did a complete recondition and overhaul to. These haul truck fuel tanks come in on a regular basis with leaks due to cracks. We cut, weld, fabricate, fix, repair, pressure test, and paint them for another round of service life. If you [...]
Here's a couple of large mining equipment radiators for some large cooling modules. The orange radiator is a spare radiator for an Atlas Copco Pit Viper 351 Drill Rig. This radiator is comprised of two radiator halves. The radiator cores are similar to locomotive style radiators in that they are mechanically bonded. By [...]
This is a Caterpillar 938G loader that we're repairing the pin bores on. The bores are worn out and distorted so we setup our portable line bore boring bar to it so we could machine and bore the bores for proper fit to the new pins. Though we have a portable line bore [...]
This is a Caterpillar 938G loader bucket that we are boring the pin holes of with our portable line bore boring bar machine. The holes that the pins go in are worn and pounded out so we either weld the bores and then machine and bore them with our portable line bore or [...]
This is a recent run we made to one of our mining customers up in northern Nevada. We picked up these two hydraulic oil coolers which are off of a Hitachi EX5500 shovel. The hydraulic system was overheating so they removed these hydraulic oil coolers and installed a set of our recored hydraulic [...]
This is a recent pick up we did at one of our mine customers in Northern Nevada. We picked up two Hitachi EX500 shovel radiators. The Hitachi EX500 radiators are what we call dual radiator assemblies because they are comprised of a low temp radiator and a high temp radiator. The Hitachi EX5500 [...]
This is a Caterpillar 966 loader bucket that came in to have its pin bores repaired. The bores for the pins were all worn out so we used our portable line bore to machine them and true them up. Some of the bores we simply welded and then bored them out. Other bores [...]
Here's a Komatsu WA900 loader radiator with two charge air coolers (CAC's) that we just finished overhauling and re-coring. The radiator and coolers came in to be rebuilt with a complete overhaul but the radiator core as well as the charge air cooler cores were all to degraded and plugged up to cost [...]
This is a Komatsu WA1200 loader Radiator and Oil Cooler assembly that we completely rebuilt and overhauled. This cooling module is a Mesabi style radiator and oil cooler that has nearly 1,600 total individual L&M tubes. It consists of a high temp radiator, low temp radiator, and an oil cooler section. We picked [...]
This is a set of hydraulic oil coolers that we re-cored for a Hitachi EX5500 shovel for one of our mining customers. The original flat tube steel cores were leaking in several areas of the core due to cracks in the tubes. So we cut the tanks of off the original cores and [...]
