Machine Shop

This is a 1-1/2 horsepower IHC International McCormick Deering Model M Throttle Governed Hit N Miss Style Flywheel engine. Some people just call it a horse and a half. We disassembled the engine so we could remove the cylinder sleeve. The cylinder was so badly worn that the piston-to-wall clearance was so excessive [...]

This is a 345 cubic inch cast iron V8 International Navistar gasoline engine we machined. These pictures show the engine block in our Rottler boring bar getting the cylinders bored for oversize pistons and rings. If you need any engine machining or machine work done we can handle it right here in our [...]

This is a Continental F163 flathead 4-cylinder gasoline engine we rebuilt for a Clark forklift. We completely disassembled the engine and put the block, crank, rods, & cylinder head in our Bayco oven to be completely thermal cleaned. After the thermal cleaning we put the parts in our Zero shotblaster before performing a [...]

Here's an aluminum Rodeck big block BBC Chevy cylinder block for a dragster that we line bored on our AMC line bore and then align honed on our Sunnen line hone. It has aluminum 4-bolt main caps secured with ARP main studs with 12-point nuts. After we got done with the machine work [...]

This is a 12 valve Cummins diesel cylinder head that came in for a hot tank cleaning, magnaflux, pressure test, and inspection. The cylinder head passed the magnaflux and pressure test with no cracks or leaks detected. The surface / deck was slightly warped so the customer elected to not do the valve [...]

Motor Mission Steals 700 Horsepower from this Littlefield Blowers force fed big block Chevy engine that powers around a street driven 1941 Willy's coupe. We performed all the machine work on the engine block which included machining it for 4 bolt splayed Milodon main caps and ARP main studs. We then line bored [...]

Here's a picture of a Jeep AMC inline straight 6 cylinder cast iron block we performed a bore and hone to the cylinders for some new oversize pistons and rings. The second picture is what the cylinders looked like before we bored them out. We are a Las Vegas machine shop located right [...]

This pic is of a 1939 Plymouth flathead inline 6-cylinder engine block in the seat-&-guide machine getting a valve job done. The cylinders we bored & honed for oversize pistons & rings can be seen also. Contact us for your Machine Shop needs! Have a great day!