This is a couple of cast iron V8 engine cylinder blocks we did a bore and hone on. The first two pictures are of a blue 429 – 460 Ford cast iron cylinder block that we bored and honed the cylinders for some new Keith Black KB Hypereutectic pistons. The last two pictures are of a cast iron 6.0 LQ9 GM LS V8 engine block which we bored and honed the cylinders for some new Wiseco forged pistons. We first setup the blocks in our Rottler boring bar machine so we could rough bore the cylinders for the new oversize pistons. Once we got all the cylinders bored we then mounted the engine blocks in our Sunnen CK10 CK-10 cylinder hone so we could finish hone the cylinders to size to give them the proper piston-to-wall clearance for their new pistons. These two engines are for one of our engine building customers here in Las Vegas, Nv. His shop is actually located in North Las Vegas. We do a lot of machine work for this particular customer on many different engines and motors that they rebuild. Precision Machine work is a must for any Performance Engine build so machining all the engine parts we work on to Accurate tolerances is a given. If you need any machine work from boring, honing, pressure testing, maging, magging, magnafluxing, surfacing, milling, grinding, polishing, balancing, align honing, line boring, valve jobs, flywheel surfacing, rotors / drums turning, mill work, lathe work, sandblasting, hot tanking, boiling, measuring, ring gear replacing, broken bolt removal, broken tap removal, broken easy-out removal, broken bit removal, crack repair, thread repair, welding, cast iron welding, aluminum welding, or anything else you can think of please call us or come and see us at our complete machine shop. We are located in Las Vegas, Nv. in southern Nevada and we are open 8am-5pm Monday thru Friday. Jimmy Ewing Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission