Skip to content
This is an all aluminum radiator custom built to replace an aluminum radiator core with plastic tanks / caps for a Caterpillar 16M Grader. The original radiator had some leaks in the core as well as a cracked plastic radiator tank. Caterpillar doesn't offer replacement parts for this radiator so the only option [...]
This is a set of Mitsubishi Montero 3.0 V6 aluminum cylinder heads that we performed a three angle valve job and surface to. These heads are SOHC which stands for single overhead cam. This means that there is one camshaft on each cylinder head. Each cylinder has 4 valves so this engine is [...]
This is a Freightliner Cascadia class 8 tractor semi truck radiator that came in for a repair. The aluminum radiator core suffered damage from the fan and debris. The top and bottom tanks, which some people refer to as caps, are plastic. The top plastic radiator tank was broken and cracked from the [...]
Here's some pics of a Dart Big M cylinder block for a big block Chevy dragster engine we're freshening up. This engine is a 637 cubic inch naturally aspirated engine though it is also setup with a nitrous system. The engine makes right at 1500 horsepower without the nitrous. When we disassembled the [...]
This is an old original copper and brass radiator for a 1939 Cadillac LaSalle with a flathead V8 gas engine in it. This radiator has the thermostat mounted into the front side of the top inlet radiator tank that operates the opening and closing of the shutters on the grill. The radiator was [...]
This is a set of aluminum Honda V6 cylinder heads that came in for rebuilding. We completely disassembled the cylinder heads so we could hot tank and then sandblast them completely clean inside and out. We then mounted the cylinder heads in our pressure tester testing machine so we could pressure test them [...]
This is a pick up we did of some radiators from one of our mining customers at a mine in Northern Nevada. We picked up a Caterpillar 793C folded core style haul truck radiator for a complete rebuild and overhaul with a rod and repair on each of the individual folded core radiator [...]
Here's some pictures of some high performance engine parts for some high end engines we've done machining and freshening to. The JE forged pistons are for a 434 cubic inch small block Chevy that is based around a Dart Iron Eagle block with a bore size of 4.125. The King rod and main [...]
This is a Kenworth bolt-on or bolt-up style radiator that came in with an overheating problem. The radiator was all dirty and plugged internally. So we disassembled the radiator so we could boil the radiator core out in our ultrasonic cleaning tank. We then did a rod and repair to the core and ran the [...]
This is a Cummins NTC350 Big Cam III cylinder block, cylinder heads, and rocker boxes that came in to be cleaned, magnafluxed, measured, inspected, and machined. We had to remove the cylinder liners from the block before we could get a good look at the lower bores. This was the first thing we [...]
