adminmmmr

About adminmmmr

This author has not yet filled in any details.
So far adminmmmr has created 1895 blog entries.

Las Vegas Machine Shop Offering Custom Engine Rebuilding, Engine & Cylinder Head Machine Work, CNC Machining, Welding, & Fabricating

Las Vegas machine shop with complete machine shop capabilities is what we offer here at Motor Mission Machine & Radiator. If you need any machine work related here in the Las Vegas valley we are fully equipped with all the machines and experience necessary to perform any and all machine work. If you [...]

2016-10-25T23:33:47+00:00October 25th, 2016|Machine Shop|

Las Vegas Radiator Shop Offering Complete Radiator Service, Repair, Rebuilding, & Replacements

Las Vegas radiator repair, rebuilding, and manufacturing is what we do here at our Las Vegas Radiator Shop called Motor Mission Machine & Radiator. If you are in the Las Vegas area and need any radiator repair, radiator rebuilding, radiator rodding, radiator rod and repair, radiator help, or anything radiator related please give [...]

2016-10-25T18:23:13+00:00October 25th, 2016|Radiator Shop|

Gas Tank Cleaning & Repair With Fuel Feed, Fuel Return, & Vent Fittings Modification Soldered In Place & Pressure Tested for EFI

This is a gas tank for a 1972 Chevy C10 pick-up truck that came in for some modifications. The fuel tank is being used with electronic fuel injection (efi) so we had to add a 3/8" fuel feed fitting, a 3/8" fuel return line fitting, as well as some vent fittings. We machined [...]

2018-01-02T21:19:30+00:00October 24th, 2016|Radiator Shop|

Chevy 383 Stroker Engine With Dart Pro1 Aluminum Cylinder Heads & Intake With Full Hydraulic Roller Comp Cams Camshaft & Valvetrain

These are some pictures of a customer's Chevy Corvette with the small block engine in it that we built into a 383 stroker engine. This engine build started with a GM 4-bolt main roller block with a one piece rear main seal. We performed all the machine work to the cylinder block with [...]

2018-01-02T21:20:41+00:00October 24th, 2016|Machine Shop|

Copper Heat Exchanger AC Condenser Cleaning, Repair, and Pressure Test

This is a copper heat exchanger that came in leaking. We had to cut one of the side plates off of the cooler so we could get to the leaking tube. We ended up cutting out the section of tube that was leaking so we could cut, fab, and fit a new section [...]

2018-01-02T21:22:18+00:00October 24th, 2016|Industrial & Heavy Equipment|

Ford 360 390 FE V8 Engine Connecting Rods, Crankshaft Grind, Flywheel Surfacing, and Rotating Assembly Balancing and Blueprinting

This is a 360 Ford FE (Ford Edsel) rotating assembly for an engine we're rebuilding. The 360 Ford is very similar to the 390 FE engine. The only difference is the stroke of the crankshaft, length of the connecting rods, & compression height of the pistons between the two engines. In these pictures [...]

2018-01-02T21:24:01+00:00October 24th, 2016|Machine Shop|

Hydraulic Oil Cooler with Fan Shroud & High Performance Electric Fan For Heavy Duty Industrial Hydraulic System Cooling

This is an aluminum hydraulic oil cooler with an aluminum fan shroud and a high performance electric fan we supplied to one of our mining customers. They have a hydraulic system on one of their pieces of equipment that keeps overheating and shutting down so they asked us to set them up with [...]

2016-10-24T23:33:40+00:00October 24th, 2016|Radiator Shop|

1964 Lincoln 430 cubic inch V8 engine machine work with cylinder bore and hone and complete engine rebuild

These are pictures of a cylinder block for a 1964 Lincoln 430 cubic inch V8 engine. In the pictures you can see that the cylinders have been bored for the new oversize pistons and rings which we did on our Rottler boring bar. The cylinders were finish honed to their final size on [...]

2016-10-25T17:15:00+00:00October 24th, 2016|Machine Shop|

Caterpillar 2W5540 Folded Radiator Cores, NGMR (Next Generation Modular Radiator) Cores, & AMOCS 119-4774 Cores For Rebuild & Overhaul

Here's a bunch of Caterpillar cores we've been rebuilding and overhauling here at Motor Mission. In the pics are a bunch of Caterpillar part number 2W5540 folded radiator cores. We rebuild a lot of these folded radiator cores with a rod and repair for the 793C haul truck radiators that we rebuild and [...]

2016-10-24T22:34:30+00:00October 24th, 2016|Industrial & Heavy Equipment|

Cast Iron Stove Handle Broken Bolt and Stud Removal With Thread Repair

This is a cast iron stove handle that was sent into us for some repair. The stove handle had a broken bolt in it so we had to machine out the broken bolt or stud. We then had to machine some new threads into the handle for a complete thread repair service. We [...]

2018-01-02T21:25:13+00:00October 23rd, 2016|Custom Shop Services|
Go to Top