This is an aluminum hydraulic oil cooler with an electric fan off of a Caterpillar 994F loader. This oil cooler came in completely dirty and covered in greasy dirt and mud due to an oil leak. So we pressure washed it, then boiled it clean in our hot tank vat and ultrasonic cleaning tanks. We then reverse flushed it internally with our Turbo Clean degreasing solution. We then pressure tested the oil cooler to determine where it was leaking. Once we located the leak we prepared the area for welding. We then pre-heated the aluminum oil cooler and started the weld repair once we got it pre-heated to our predetermined temperature. After we completed the welding repair we then re-pressure tested the oil cooler to make sure it doesn’t have any leaks. Finally, we did a final clean and flush and then prepped it for a new coat of black paint. We also replaced the electric fan motor as well as the plastic fan blade. For all of your oil cooler, heat exchanger, and heat transfer needs please give us a call.
Motor Mission Machine & Radiator 5435 Desert Point Dr. Las Vegas, Nv. 89118 Phone: (702) 649-2366 or (702) 649-0648 Fax: (702) 649-4133 www.MotorMission.com Facebook.com/MotorMission